[Eres]

– is there spark
Yes, a former mechanic has also confirmed this for me.

– does it start with brake cleaner sprayed in air filter housing
No it does not.

– any fuel coming out of the test port, after ignition off, if you press on the test valve.
Yes, it sprays fuel up.

If you’re close to Rotterdam, I can find what the issue is.
No, I live in Denmark. But thank you for the offer.

[Eres]

Hello liviu2004, thanks a lot for the reply, I will try to answer you:

1. That maf, take it off and find 1st bin, bin it
The MAF the car came with when i bought the car was a Siemens 5wk9 606 90 530 463>PBT-GF30<. The car never ran perfect since I got it. I have since changed it with a “Johns Autoteile” and now a “Delphi Technologies”.

2. buy vdo or original gm maf, that to correct a problem you made yourself buying cheap.
There is this one VDO branded one in a shop near me when searching with the cars specs. here

3. What brand is the spark coil? Let me guess, not oem and called Bremi? You wanna know how I know?
Coil pack: GM 90 536 194, 5WK9 317 1
I have tried testing the setup in these videos here number 1, 2, 3 and 4. I have added a picture of the coil pack.
The car has stood still for a year now, and the battery is dead. I have noticed that the car uses power while being shut off. Do not know how much.

4. How old are the spark plugs?
Spark plugs: BOSCH FLR8LDCU+9 R6
I have no clue. I would guess it is maybe the original ones the car was born with. I have tried testing them in these four videos here:

5. Have you ever changed fuel filter? Dive under the car, rear left or right, does it look old to you? Its only 10€ a new one.
Yes I have changed it. It was located the same place as you mentioned. I do not know how to measure fuel pressure if that is relevant? There is what I believe is a schrader valve on to fuel line that maybe could be used to measure it. But I do not have a proper valve connector to connect to the schrader valve on the fuel line.

6. What do you read faultcodes with? Anything else the  opcom, read all faults with pedal test see youtube.
I am using a Aautel Autolink AL319, I believe it reads all the codes. I have mentioned all the codes from the Aautel Autolink AL319 in the OP.

[Auteur]

Berichten