Aandraaimomenten Astra T98

4 berichten aan het bekijken - 1 tot 4 (van in totaal 4)
  • Auteur
    Berichten
  • #18373948
    Ron Natrop
    Deelnemer
      Lid sinds:
      20 April 2020

      Beste mensen

      Ik ben bezig met het opknappen van mijn astra, en kan wat hulp gebruiken.

      De bedoeling is om de koppakking te vervangen en meteen de distributie mee te nemen. Ik vind heel veel verschillende aandraaimomenten op het net, en vroeg me af of iemand een lijstje of een link heeft met de juiste aandraaimomenten voor o.a. kop, bougies, kleppendeksel etc. Zou me enorm helpen. :help:

       

      #18373958
      pjotter
      Deelnemer
        Lid sinds:
        21 November 2013

        [quote quote=18373948]Beste mensen Ik ben bezig met het opknappen van mijn astra, en kan wat hulp gebruiken. De bedoeling is om de koppakking te vervangen en meteen de distributie mee te nemen. Ik vind heel veel verschillende aandraaimomenten op het net, en vroeg me af of iemand een lijstje of een link heeft met de juiste aandraaimomenten voor o.a. kop, bougies, kleppendeksel etc. Zou me enorm helpen.

        https://workshop-manuals.com/vauxhall/astra-g/j__engine_and_engine_aggregates/repair_instructions/recommended_torque_values/

        Astra G

        J Engine and Engine Aggregates > Repair Instructions > Recommended Torque Values

        Recommended Torque Values

        Nm
        Cover to cylinder head cover
        8
        Starter to cylinder block
        45
        Drive disc to crankshaft
        55 + 30° + 15° 1)
        Axle shaft balancing weight to axle shaft
        10
        Exhaust manifold to turbocharger
        30
        Exhaust manifold to cylinder head
        22 2)
        Damper (tensioner) to auxiliary aggregates support
        20
        Damper (tensioner) to tensioner
        20
        Cover (oil pump) to timing case
        8
        Timing case cover (injection pump) to timing case
        6
        Torsional vibration damper to crankshaft
        150 + 45° + 15° 1)
        Throttle valve connecting piece to inlet manifold
        5
        Dynamic oil level control to oil pan
        8
        Upper part of intake manifold to lower part of intake manifold
        8
        Lower part of intake manifold to cylinder head
        22 2)
        Injection line to traverse injection nozzle
        30
        Injection line to injection pump
        30
        Injection pump to cylinder block
        25
        Accelerator pedal to bulkhead cover plate
        6
        Duplex timing chain guide rail to timing case
        8
        Simplex timing chain guide rail to timing case
        8
        Alternator to alternator bracket (coolant flange)
        35
        Transmission to cylinder block
        60
        Glow plugs to cylinder head
        10
        Left engine damping block support to transmission
        35
        Engine damping block support to timing case
        50
        Injection pump bracket to injection pump
        20
        Fuel injection pump bracket to cylinder block
        20
        Alternator bracket to cylinder head
        20
        Rear engine damping block bracket to transmission
        80
        Engine damping block bracket to engine damping block support (left)
        55
        Engine damping block bracket to engine damping block support (right)
        55
        Engine damping block bracket to engine damping block (left)
        55
        Engine damping block bracket to engine damping block (right)
        55
        Crankshaft pulse pick-up to cylinder block
        8
        Refrigerant line to receiver-dryer
        20
        Refrigerant line to refrigerant line intake side (air cleaner housing)
        20
        Ribbed V-belt tensioner to auxiliary aggregates support
        42
        Fuel line to injection pump
        25
        Coolant pump to timing case
        20
        Coolant pipe to automatic transmission (M10)
        35
        Coolant pipe to manual transmission (M8)
        20
        Coolant pipe to cylinder block
        35
        Crankshaft bearing bridge to cylinder block
        20
        Crankshaft bearing cap to cylinder block
        90 + 60° + 15° 1)
        Fan housing to radiator
        5
        Exhaust gas recirculation solenoid valve to bracket
        4
        Charge control solenoid valve to wheel well
        4
        Switchover valves solenoid valve to bracket
        4
        Rear engine damping block to bracket
        55
        Rear engine damping block to front axle body
        55
        Engine damping block (left) to body
        20
        Right engine damping block to body
        35
        Front engine damping block to transmission
        60
        Front engine damping block to front axle body
        55
        Camshaft bearing caps to cylinder head
        15
        Camshaft pulley to camshaft
        90 + 60° + 30° 1)
        Oil drain plug to oil pan
        10
        Oil pressure switch to cylinder block
        30
        Oil filter housing to cylinder block
        20
        Oil dipstick guide tube to cylinder block
        8
        Turbocharger oil return line to turbocharger
        8
        Turbocharger oil return line to cylinder block
        20
        Oil intake pipe to oil pan
        8
        Oil spray nozzles to cylinder block
        22
        Turbocharger oil feed line to turbocharger
        20
        Turbocharger oil feed line to cylinder block
        20
        Oil pan to transmission housing (M8)
        20
        Oil pan to transmission housing (M10)
        40
        Oil pan to cylinder block
        20
        Swing arm to spring strut
        65
        Con-rod bearing cap to con-rod
        35 + 45° + 15° 1)
        Wheel to wheel hub
        110
        Pulley to coolant pump
        20
        Hose clamps for air intake and charge air hoses
        3.5
        Flywheel to crankshaft
        45 + 30° + 15° 1)
        Atmospheric pressure sensor to bracket
        4
        Coolant temperature sensor to cylinder head
        18
        Charge pressure sensor to upper part of intake manifold
        8
        Simplex injection pump sprocket to injection pump
        28
        Timing case to cylinder block
        20
        Timing chain tension rail to cylinder block
        20
        Starter support to starter
        7
        Starter support to cylinder block
        25
        Exhaust manifold support to exhaust manifold
        25
        Exhaust manifold support to cylinder block
        25
        Thermostat housing to cylinder head
        8
        Injection nozzle traverse to cylinder head
        3)
        Return manifold to turbocharger
        30
        Ribbed V-belt guide roller to support
        35
        Switchover valve vacuum unit to lower part of intake manifold
        8
        Lower alternator fastening bolt to timing case
        35
        Lower radiator bracket to front axle body
        15
        Vacuum pump to cylinder head
        8
        Condenser to radiator
        5
        Closure bolt (duplex chain tensioner) to timing case
        60
        Closure bolt (simplex chain tensioner) to timing case
        60
        Screw plug for oil pressure regulating valve to cylinder block
        40
        Safety valve closure bolt (oil pump)
        50
        Front axle body to body (all bolts)
        90 + 45° + 15° 1)
        Front exhaust pipe to return manifold
        20
        Heat exchanger to oil filter housing
        20
        Auxiliary fan housing to radiator/ condenser
        5
        Intermediate shaft to steering gear
        22
        Cylinder head to timing case
        20 + 30° + 5° 1)
        Cylinder head to cylinder block
        25 + 65° + 65° + 65° + 65° + 15° 1)
        Cylinder head cover to cylinder head
        8

        1 ) Use new fastening bolt(s).
        2 ) Use new fastening nut(s).
        3 ) Tighten new fastening bolt using Torx socket and extension (without handle and ratchet), then turn fastening bolt a further 360°.

         

        #18373959
        Haasje17
        Moderator
          Lid sinds:
          8 September 2009

          Het is natuurlijk handig om te weten over welk model motor we het hier hebben.

          En ik ga er even vanuit dan je een Astra G bedoeld.

          #18374005
          Ron Natrop
          Deelnemer
            Lid sinds:
            20 April 2020

            OPEL ASTRA G Stationwagen (T98) | 2002 – 1.6 (F35) – 1598ccm 84pk

          4 berichten aan het bekijken - 1 tot 4 (van in totaal 4)
          • Je moet ingelogd zijn om een antwoord op dit onderwerp te kunnen geven.