Even voorstellen op de eerste plaats is ook fijn!
Maar zo zit het volgens tis
Resetting the service interval display for Agila, Meriva, Astra-G, Zafira, Vectra-C, Signum
Manual reset:
1
"Ignition OFF" (terminal 15). The display in the instrument cluster must show the trip odometer.
2
Press and hold reset button (trip odometer button)
3
"Ignition ON" (terminal 15) keep reset button pressed for at least 10 seconds longer until the service interval indicator changes.
4
After 10 seconds the display in the instrument cluster shows the symbol with the maximum mileage (35,000 km for petrol in the Meriva; 34,000 km in the Signum and Vectra-C and 50,000 km for diesel engines) or "InSP" for 2 seconds. Exception, Agila: 30,000 km for petrol and diesel.
5
After a successful reset, the text "- - - -" appears in the display until the actuating knob is released. Then the distance travelled or time display appears again.
The timer in the instrument cluster is set to 24 months. The engine control unit receives a signal via the CAN bus and the "oil level" is set to 100%.
This means that the control unit and the instrument have been reset to zero.
EVen zoeken had trouwens ook gekunt