Water at the spark plugs and coil

Forumindex Forums Modellen Astra Water at the spark plugs and coil

3 berichten aan het bekijken - 1 tot 3 (van in totaal 3)
  • Auteur
    Berichten
  • #18483399
    theshadowmanman_pk
    Deelnemer
      Lid sinds:
      18 October 2022

      Greetings,

      I got some issues with my Astra J, 1.4 Turbo / 140HP petrol. I got misfires and the spark plugs were exchanged quire recently ~8k km. So I decided to take a look at the coil as the suspect next in line. What I found was als shown in the pictures and I believe that water was getting into the spark plugs.

      I’m reaching to you to ask if this is possible to happen in normal operation or it was deliberately done during the last exchange of the spark plugs? What is your experience on the topic?

      I’ve added a picture of a good spark plug for reference.

      Regards!20221018_071449045_iOS20221018_071456084_iOS20221018_071519734_iOS20221018_071541989_iOS20221018_071548464_iOS

      #18487160
      bachi
      Deelnemer
        Lid sinds:
        22 October 2022

        [quote quote=18483399]Greetings, I got some issues with my Astra J, 1.4 Turbo / 140HP petrol. I got misfires and the spark plugs were exchanged quire recently ~8k km. So I decided to take a look at the coil as the suspect next in line. What I found was als shown in the pictures and I believe that water was getting into the spark plugs. I’m reaching to you to ask if this is possible to happen in normal operation or it was deliberately done during the last exchange of the spark plugs? What is your experience on the topic? I’ve added a picture of a good spark plug for reference https://100001.onl/ https://1921681254.mx/. Regards!20221018_071449045_iOS20221018_071456084_iOS20221018_071519734_iOS20221018_071541989_iOS20221018_071548464_iOS[/quote]

         

        I got this,..

        #18487358
        Febe
        Deelnemer
          Lid sinds:
          5 November 2004

          This is not normal, it should be nice and clear.

          Clean it all securely en check de rubbers.

          I allwish use a very littlebit of cuperpaste on te sparkplugthreat before mounting.

          Use a torqwrench.

        3 berichten aan het bekijken - 1 tot 3 (van in totaal 3)
        • Je moet ingelogd zijn om een antwoord op dit onderwerp te kunnen geven.